The term wreck diver is usually associated with recreational diving, exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. Read on to learn more about the art of wreck diving. Here are some tips to help you get started. First, get your equipment ready! There are many options for equipment. Getting the right kind of gear can make the difference between a fun and dangerous dive.
NON-PENETRATION WRECK DIVING
You can learn a lot about non-penetration wreck diving if you are new to diving. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. Additionally, the underlying terrain can have sharp edges and currents may carry them away from where they are interested. This type of terrain is dangerous and it's best to avoid wreck diving.
Technical penetration diving may seem easier than it is, however, there are still dangers. There are several dangers to diving in the light area, including overhead hazards and proximity to the wreck structure. Also, you could get caught in narrow passageways. The presence of silt and/or mud in wrecks can also make orientation difficult and severely affect visibility. Non-penetration wreck diving allows the diver to stay within the zone of light and move to an exit point.
Surveying a sunken wreck
To survey a sunken ruin, in addition to traditional surveys and knowledge of the maritime history of this area, you will need specific equipment. Depending on your time and requirements, you may use a combination GPS position fix, tape baseline, or offset with ties measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
A shipwreck survey's objective is to locate the vessel and determine its exact location. It should identify historical events, navigational hazards, and environmental conditions. A summary of the vessel's structure, the incident that caused it to sink, and any previous archeological surveys should be included in the survey report. Finally, it should be possible to plot the site on a nautical chart in order to make accurate measurements.
Equipment needed
You should be familiar with the shipwreck before you dive it. Its layout, key points and hazards are all important. These facts will help prepare you for your dive. Below, you'll learn about the essential equipment that you'll need to dive a shipwreck. This checklist is important to review before you dive. You can also bring it to the dive site.
Proper buoyancy control is crucial to not lose your way in the darkness. Proper buoyancy control is crucial for wreck diving. A weight belt and buoyancy control tank are essential for wreck diving. A weight belt and a regulator are necessary if you want to have fun diving. These two pieces of equipment will ensure that you and others are safe.