Wreck diving is often associated with recreational diving and exploring shipwrecks. Although wrecks are the most common site for wreck diving, there is a growing trend to scrape old ships to make artificial reef sites. Learn more about wreck diving by reading on. These are the essential tips that will help you get started with wreck diving. First, get your equipment ready! There are many kinds of equipment. The difference between a dangerous and fun dive is how you choose your gear.
Non-penetration wreck diving
If you are new to scuba diving and would like to try non-penetration wreck diving, then there are a few things you need to know. First, wrecks often provide a great place to fish. Divers should be aware that lines and fishing nets may be in the area. Also, divers should be aware of the terrain beneath them. Currents and sharp edges can cause them to drift away from their desired destinations. While it's not advisable to dive in this type of terrain, non-penetration wreck diving is a good option.
It may sound simpler, but technical penetration diving can pose a lot of dangers. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. Furthermore, the presence of silt and mud in some wrecks can severely compromise visibility and make orientation very difficult. To avoid these dangers, non-penetration wreck diving requires that the diver stay within the light zone and move to an exit point.
Viewing a sunken shipwreck
Surveying a sunken ship requires more than traditional surveys. You also need to have a good understanding of the maritime history and specific equipment. Depending on your time and requirements, you may use a combination GPS position fix, tape baseline, or offset with ties measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
The objective of a shipwreck survey is to identify the vessel and its location. It should also identify navigational hazards, environmental conditions, and historical events. The survey report should include information about the vessel's features, the incident that brought it down, and any past archeological surveys. The site should be able to be plotted on an nautical chart to allow for precise measurements.
Equipment required
Before diving a shipwreck, you should know about it. Learn about the layout of the wreck, its key points and potential hazards. These things will help you prepare for your dive, and reduce the chance of an accident. Here's a list of the most important equipment you will need to dive a wreck. Before diving, make sure you read the checklist and bring it along to the dive site.
Proper buoyancy control is crucial to not lose your way in the darkness. For wreck diving, you need to have good buoyancy control. Without a buoyancy control tank or weight belt, it is not recommended that you dive deep in water. If you are looking for a great dive, a weight belt is essential. These two pieces of equipment will ensure that you and others are safe.