A regulator for diving controls the level of the diver's breath gas. While this is most commonly the case, a regulator can also control pressures for other gases used during diving. An alternate second stage can be called a dive regulator. Attached to the tank of the diver is the regulator cylinder. The diver will breathe through it to keep him comfortable underwater.
Scuba regulators
A scuba regulator is an integral part of any scuba diving system. They control how much air is supplied to the diver. This allows them to breathe comfortably. They can also be used to stop and start air delivery in water. In an emergency, the regulator can also be used to flush the water tank and send air out.
Alternate second stage
A diver's regulator has two distinct parts: the primary stage and the alternate second stage. The primary stage provides air for the diver and the secondary stage replenishes that air. The alternative stage can either be a less-efficient or better performing model. It is not as effective as the primary stage, but can perform the exact same function.
Balanced regulator
The balanced dive regulator is an efficient and versatile scuba diving regulator. It delivers oxygen to the diver quickly and efficiently. Its progressive design and quality materials make it an excellent choice for any dive environment.
DIN valves
The valve type is a key feature when selecting a dive regulator. Two types are most common: DIN and Yoke valves. A Yoke-valve has an O ring that fits into the tank's first stage valve. A DIN valve has an O-ring that fits into the regulator's first phase.
Swivel joint hose adaptor
Divers can use a swivel joint adaptor for their dive regulator as a versatile accessory. It helps you route the regulator hose naturally and reduces jaw strain. You can also share air with your buddy. These accessories require little to no maintenance and can be rinsed out after every dive.
Protective regulators
There are many options when it comes choosing an environmentally sealed diving regulator. These regulators are excellent for cold water divers due to a number of advantages. Their corrosion-resistant design is one of their best features. This can be achieved using zirconium instead of brass. These products often include a factory-fitted environmental seal and large purge buttons. Some products even have a limited lifetime warranty.